Aluminium Under-bed fuel tank to suit 1960 - 1962 GM Pickup Trucks 
FEATURES
Full bolt-in kit, no welding required!
CAD designed, CNC laser cut and folded for presise fitment.
Cross-interlocking, full height internal baffling.
Tig welded using 5052 grade aluminium.
EFI and non-EFI tanks available.
90L capacity, designed to fit under bed floor.
INCLUDES
Fitted with a 90-0 OHM Fuel Sender unit.
Supplied powdercoated in our exclusive Textured Black Durable Coating.
Supplied with all fasteners and instructions.
ADDITIONS
These tanks require the factory rear x-member to be removed to allow for a bigger tank, we can supply our bolt-in rear x-member to replace at an aditional cost.
Factory gauges from 1960-1966 run on 0-30 Ohm resistance, so we can supply a fuel sender converter to run the factory gauges at an additional cost.
 
Developed and tested on our own vehicles, designed and manufactured in-house in Brisbane, QLD.
 
EFI TANKS
EFI Tanks are fitted with our exclusive billet internal pump housing  that accepts 2x40mm in-tank pumps (*pumps not included*). They are supplied with 1xAN10 female fitting welded on the bottom rear of the tank for use as a drain.
NON-EFI TANKS
Non-EFI tanks are not supplied with the pump housing or the pump housing flange. They are supplied with 1x AN10 female fitting welded on the bottom rear of the tank for a fuel feed. They are also supplied with 1xAN8 female fitting welded on the top of the tank for breather.
BED FILL OPTION
O-ringed billet cap is supplied. It is designed to sit under the bed floor to allow for an access panel in the bed.
SIDE FILL OPTION
Side fill option allows you to plumb into an already existing or new side fill panel on the bedside. A 90deg 2inch feed pipe is welded on and is designed to clear the chassis rail and bed.